Developers Matrix

FPS Calculator

Find out how many FPS your PC will get in games. Enter your processor and graphics card, pick a game, and see your average frame rate and 1% low at 1080p, 1440p and 4K, which resolution keeps up with your monitor, and how many fps an upgrade would add.

  • 121 graphics cards
  • 153 processors
  • 10 games with measured results
  • No signup

Your PC

Ultra settings, no ray tracing. 10 games have measured results.

Monitor refresh rate

In Hz. Most monitors are 60, 144 or 165.

Average fps · 11 games · Ultra144 Hz monitor
1080pGPU bound

60fps

1% low 47·16.8 ms a frame

About 60 of 144

1440pGPU bound

41fps

1% low 33·24.1 ms a frame

About 41 of 144

4KGPU bound

22fps

1% low 17·45.5 ms a frame

About 22 of 144

Best match for this PC: 1080p, at about 60 fps. To get closer to 144 fps, lower some settings.

Averages for 11 demanding games at Ultra settings, without ray tracing or upscaling. The 1% low comes from the lows measured in the same games. Processor figure: scaled from the Ryzen 5 5600X by boost clock. Graphics card figure: review benchmark. How this works

How many fps would an upgrade add?

Pick a new part and compare it with your PC at each resolution.

Change
1080p+46%

60 to 87fps

1440p+56%

41 to 64fps

4K+58%

22 to 35fps

Swapping your RTX 3060 for the Radeon RX 9060 XT lifts every resolution, and your Ryzen 5 5600 keeps up with it. Check the new pair for a bottleneck.

Check this PC against a specific game

How Many FPS Will I Get?

Your frame rate depends mostly on your graphics card and your resolution, and partly on your processor. A Ryzen 5 5600 with an RTX 3060 averages about 60 fps at 1080p, 41 fps at 1440p and 22 fps at 4K in demanding games on Ultra settings.

Each step up in resolution asks the graphics card to draw more pixels, so the frame rate falls: 1440p has about 1.8 times the pixels of 1080p, and 4K has 4 times. The processor prepares roughly the same number of frames at any resolution, so it matters most at 1080p, where the card is fastest. Lower settings, lighter games and upscaling such as DLSS or FSR all raise the numbers above.

FPS in Popular Games

Average fps and 1% low at 1440p, as Tom's Hardware measured them with a Ryzen 7 9800X3D. Settings are the ones Tom's Hardware tested, which are often higher than players use. Pick a game in the calculator to see your own PC.

GameRTX 5060RTX 5070Radeon RX 9070 XT
FortniteHigh, with Lumen and Nanite on661% low 55941% low 791201% low 106
Grand Theft Auto V EnhancedMaximum, with ray tracing629997
Counter-Strike 2High2271% low 1103561% low 1534341% low 247
Apex LegendsVery High1941% low 1552851% low 2253001% low 269
Cyberpunk 2077Ultra, no ray tracing421% low 37691% low 58821% low 71
ARC RaidersUltra661% low 611171% low 1051271% low 116
Black Myth: WukongVery High331% low 29531% low 46661% low 58
Assassin's Creed ShadowsUltra High, with ray tracing211% low 18351% low 32481% low 42
Alan Wake 2Ultra, no ray tracing321% low 24541% low 50721% low 60
Clair Obscur: Expedition 33Epic341% low 28521% low 44701% low 60

Source: Tom's Hardware GPU benchmarks hierarchy, per game results, read November 12, 2026. GTA 5 Enhanced and Assassin's Creed Shadows are tested with ray tracing on. GTA 5 1% lows are left out because they swung too much between cards to be useful. Apex Legends stops at 300 fps.

FPS by Graphics Card at 1080p, 1440p and 4K

Average fps in 11 demanding games at Ultra settings with a Ryzen 7 9800X3D, the processor used in the review data. Current cards with measured results, fastest first.

Graphics card1080p1440p4K
RTX 5090201169111
RTX 409018414689
RTX 508017013177
Radeon RX 7900 XTX16112170
RTX 4080 Super15811969
RTX 5070 Ti15711868
RTX 408015511767
Radeon RX 9070 XT15311465
Radeon RX 7900 XT14210560
RTX 4070 Ti Super14010359
Radeon RX 907013810158
RTX 4070 Ti1359854
RTX 50701329755
RTX 4070 Super1279149
Radeon RX 7800 XT1188545
RTX 40701117841
RTX 5060 Ti1057340
Radeon RX 7700 XT1037238
Radeon RX 9060 XT986735
RTX 5060886022
RTX 4060 Ti885924
Intel Arc B580715128
Radeon RX 7600 XT735026
RTX 4060714817
Radeon RX 7600704618
RTX 5050694517
Intel Arc B570644420

Source: Tom's Hardware GPU benchmarks hierarchy, with the test processor's effect modelled as described below. Cards with 8 GB of video memory fall behind at 4K in this data. The Radeon RX 7600 XT 1080p figure is corrected, because the published one does not fit its 1440p result. Figures updated November 11, 2026.

Which Graphics Cards Get 144 FPS at 1440p?

1440p at 144 Hz is a common target for a new gaming PC. On Ultra settings in demanding games, very few cards average 144 fps or more. Most of the rest get there with some settings lowered or upscaling switched on.

144 fps or more at 1440p

Smooth on a 144 Hz monitor

RTX 5090 (169), RTX 4090 (146)

100 to 143 fps at 1440p

Very smooth, and close to 144 Hz with a few settings lowered

RTX 5080 (131), Radeon RX 7900 XTX (121), RTX 4080 Super (119), RTX 5070 Ti (118), RTX 4080 (117), Radeon RX 9070 XT (114), Radeon RX 7900 XT (105), RTX 4070 Ti Super (103), Radeon RX 9070 (101)

60 to 99 fps at 1440p

Smooth at 60 Hz, a good base for 1440p

RTX 4070 Ti (98), RTX 5070 (97), RTX 4070 Super (91), Radeon RX 7800 XT (85), RTX 4070 (78), RTX 5060 Ti (73), Radeon RX 7700 XT (72), Radeon RX 9060 XT (67), RTX 5060 (60)

Under 60 fps at 1440p

Lower settings or play at 1080p

RTX 4060 Ti (59), Intel Arc B580 (51), Radeon RX 7600 XT (50), RTX 4060 (48), Radeon RX 7600 (46), RTX 5050 (45), Intel Arc B570 (44)

What Is a Good FPS for Gaming?

30 fps
Playable. Many console games run here, but fast movement looks choppy on PC.
60 fps
The standard for smooth PC gaming, and what most monitors and TVs show.
100 to 144 fps
Clearly smoother on a high refresh monitor. A good target for 1440p.
240 fps and up
Matters mainly in competitive shooters on a 240 Hz monitor.

Aim for your monitor's refresh rate. A 60 Hz screen shows at most 60 frames a second, so anything above that is not seen, although it can still make the game feel a little more responsive.

How This FPS Calculator Works

  1. 1

    Graphics card speed from reviews

    Frame rates for 44 graphics cards come from Tom's Hardware's GPU benchmarks hierarchy: the average of 11 demanding games at Ultra settings at 1080p, 1440p and 4K. Other cards are read off our own hardware scale and marked as estimates.

  2. 2

    Processor speed from reviews

    Processor results come from Tom's Hardware's CPU benchmarks hierarchy and are turned into the number of frames each processor can prepare in the same games. Close variants without their own review, such as the Ryzen 5 5600, are scaled from their measured sibling by boost clock.

  3. 3

    Results for single games

    For 10 popular games, Tom's Hardware also publishes each game's own average and 1% low for 14 current cards. Those cards show their measured numbers. Every other card is scaled by how the game ran compared with the 11 game average, and the processor side uses the frame rate the test processor reached in that game. Checked against the measured results, the model is typically within 2% to 7%.

  4. 4

    Putting them together

    Your frame rate sits close to the lower of the two numbers. Because the figures average many games, the calculator blends the two the way the review results do, so your result is a little under the lower number. This is the same model the bottleneck calculator uses, so the two tools always agree.

  5. 5

    Comparing an upgrade

    The upgrade comparison runs the same sum with the new part in place of the old one, then shows the gain at each resolution. If your processor stops a new card from giving most of its speed, it says so.

What it does not cover: ray tracing (apart from GTA 5 and Assassin's Creed Shadows, which are tested with it on), upscaling and frame generation, Low and Medium settings, stutter beyond the 1% low, and laptop parts. To check a game's published requirements, use the Can You Run It checker. To see which part limits your frame rate, use the bottleneck calculator.

Frequently Asked Questions About FPS

How many FPS will I get?
Enter your processor and graphics card in the calculator above, and pick a game. It shows your average frame rate and 1% low at 1080p, 1440p and 4K, either in one of 10 popular games or across 11 demanding games on Ultra settings. For example, a Ryzen 5 5600 with an RTX 3060 averages about 60 fps at 1080p and 41 fps at 1440p across the 11 games, and about 51 fps at 1080p in Cyberpunk 2077 on Ultra.
What is a good FPS for gaming?
30 fps is playable and is what many console games run at. 60 fps is the standard for smooth PC gaming. 100 to 144 fps suits a high refresh monitor and feels noticeably smoother, and 240 fps or more matters mainly in fast competitive shooters. The best target is your monitor's refresh rate, because frames above it are never shown.
Is 60 FPS good?
Yes. 60 fps is smooth for almost every game and matches the refresh rate of most standard monitors and TVs. Fast shooters feel better at higher frame rates, but only if your monitor can show them.
How accurate is this FPS calculator?
It uses published review results, not guesses. 44 of the 121 graphics cards use Tom's Hardware benchmark results directly, and every result says whether its figures are measured, scaled or estimated. For the 10 games with their own results, the cards Tom's Hardware tested show their measured numbers, and the model behind the other cards lands typically within 2% to 7% of those measured results. A single mid range card can still be off by up to about 20% in one game, and lower settings run faster than the settings tested.
Does the processor affect FPS?
Yes, mostly at 1080p and in fast games. The processor sets a ceiling on how many frames can be prepared, and the graphics card draws them. If the processor is the lower of the two, a faster graphics card adds little. The upgrade comparison in the calculator shows when that happens.
Will a new graphics card increase my FPS?
Usually, as long as your processor can keep up. A Ryzen 5 5600 with an RTX 3060 averages about 41 fps at 1440p, and the same PC with an RTX 5060 Ti averages about 69. Put your own parts into the upgrade comparison to see the gain at each resolution before you buy.
Why is my FPS lower than the calculator says?
The most common reasons are a game that is heavier than average, ray tracing switched on, memory running at its slow default speed because XMP or EXPO is off in the BIOS, too little free video memory at high texture settings, or background apps using the processor. Laptops also run slower than desktop parts with the same name.
How many FPS will I get in Fortnite?
It depends on your graphics card and settings. In Tom's Hardware's test at High with Lumen and Nanite on, an RTX 5060 averaged 91 fps at 1080p and 66 fps at 1440p, and an RTX 5070 averaged 121 and 94, with a Ryzen 7 9800X3D. Competitive players often turn those features off, which runs far faster. Pick Fortnite in the calculator to see your own PC.
What is a 1% low in FPS?
The 1% low is the frame rate of the slowest 1% of frames. It shows how smooth a game feels: an average of 60 fps with a 1% low of 50 feels steady, while the same average with a 1% low of 30 feels choppy. The calculator takes the 1% low from the lows Tom's Hardware measured in each game.
What is frame time?
Frame time is how long each frame takes to arrive, in milliseconds. It is 1000 divided by the frame rate, so 60 fps is about 16.7 ms a frame and 144 fps is about 6.9 ms. Lower and steadier is smoother.
Is the FPS calculator free?
Yes. It is free with no signup and no limits, and it runs in your browser.

Related PC Gaming Tools

About the data

Card figures
Tom's Hardware GPU hierarchy
Processor figures
Tom's Hardware CPU hierarchy
Games averaged
11, Ultra settings
Games with own results
10
Game results read
November 12, 2026
Graphics cards
121 (44 measured)
Processors
153
Last updated
November 11, 2026