FPS Calculator
Find out how many FPS your PC will get in games. Enter your processor and graphics card, pick a game, and see your average frame rate and 1% low at 1080p, 1440p and 4K, which resolution keeps up with your monitor, and how many fps an upgrade would add.
- 121 graphics cards
- 153 processors
- 10 games with measured results
- No signup
Your PC
Ultra settings, no ray tracing. 10 games have measured results.
In Hz. Most monitors are 60, 144 or 165.
60fps
1% low 47·16.8 ms a frame
About 60 of 144
41fps
1% low 33·24.1 ms a frame
About 41 of 144
22fps
1% low 17·45.5 ms a frame
About 22 of 144
Best match for this PC: 1080p, at about 60 fps. To get closer to 144 fps, lower some settings.
Averages for 11 demanding games at Ultra settings, without ray tracing or upscaling. The 1% low comes from the lows measured in the same games. Processor figure: scaled from the Ryzen 5 5600X by boost clock. Graphics card figure: review benchmark. How this works
How many fps would an upgrade add?
Pick a new part and compare it with your PC at each resolution.
60 to 87fps
41 to 64fps
22 to 35fps
Swapping your RTX 3060 for the Radeon RX 9060 XT lifts every resolution, and your Ryzen 5 5600 keeps up with it. Check the new pair for a bottleneck.
Check this PC against a specific gameHow Many FPS Will I Get?
Your frame rate depends mostly on your graphics card and your resolution, and partly on your processor. A Ryzen 5 5600 with an RTX 3060 averages about 60 fps at 1080p, 41 fps at 1440p and 22 fps at 4K in demanding games on Ultra settings.
Each step up in resolution asks the graphics card to draw more pixels, so the frame rate falls: 1440p has about 1.8 times the pixels of 1080p, and 4K has 4 times. The processor prepares roughly the same number of frames at any resolution, so it matters most at 1080p, where the card is fastest. Lower settings, lighter games and upscaling such as DLSS or FSR all raise the numbers above.
FPS in Popular Games
Average fps and 1% low at 1440p, as Tom's Hardware measured them with a Ryzen 7 9800X3D. Settings are the ones Tom's Hardware tested, which are often higher than players use. Pick a game in the calculator to see your own PC.
| Game | RTX 5060 | RTX 5070 | Radeon RX 9070 XT |
|---|---|---|---|
| FortniteHigh, with Lumen and Nanite on | 661% low 55 | 941% low 79 | 1201% low 106 |
| Grand Theft Auto V EnhancedMaximum, with ray tracing | 62 | 99 | 97 |
| Counter-Strike 2High | 2271% low 110 | 3561% low 153 | 4341% low 247 |
| Apex LegendsVery High | 1941% low 155 | 2851% low 225 | 3001% low 269 |
| Cyberpunk 2077Ultra, no ray tracing | 421% low 37 | 691% low 58 | 821% low 71 |
| ARC RaidersUltra | 661% low 61 | 1171% low 105 | 1271% low 116 |
| Black Myth: WukongVery High | 331% low 29 | 531% low 46 | 661% low 58 |
| Assassin's Creed ShadowsUltra High, with ray tracing | 211% low 18 | 351% low 32 | 481% low 42 |
| Alan Wake 2Ultra, no ray tracing | 321% low 24 | 541% low 50 | 721% low 60 |
| Clair Obscur: Expedition 33Epic | 341% low 28 | 521% low 44 | 701% low 60 |
Source: Tom's Hardware GPU benchmarks hierarchy, per game results, read November 12, 2026. GTA 5 Enhanced and Assassin's Creed Shadows are tested with ray tracing on. GTA 5 1% lows are left out because they swung too much between cards to be useful. Apex Legends stops at 300 fps.
FPS by Graphics Card at 1080p, 1440p and 4K
Average fps in 11 demanding games at Ultra settings with a Ryzen 7 9800X3D, the processor used in the review data. Current cards with measured results, fastest first.
| Graphics card | 1080p | 1440p | 4K |
|---|---|---|---|
| RTX 5090 | 201 | 169 | 111 |
| RTX 4090 | 184 | 146 | 89 |
| RTX 5080 | 170 | 131 | 77 |
| Radeon RX 7900 XTX | 161 | 121 | 70 |
| RTX 4080 Super | 158 | 119 | 69 |
| RTX 5070 Ti | 157 | 118 | 68 |
| RTX 4080 | 155 | 117 | 67 |
| Radeon RX 9070 XT | 153 | 114 | 65 |
| Radeon RX 7900 XT | 142 | 105 | 60 |
| RTX 4070 Ti Super | 140 | 103 | 59 |
| Radeon RX 9070 | 138 | 101 | 58 |
| RTX 4070 Ti | 135 | 98 | 54 |
| RTX 5070 | 132 | 97 | 55 |
| RTX 4070 Super | 127 | 91 | 49 |
| Radeon RX 7800 XT | 118 | 85 | 45 |
| RTX 4070 | 111 | 78 | 41 |
| RTX 5060 Ti | 105 | 73 | 40 |
| Radeon RX 7700 XT | 103 | 72 | 38 |
| Radeon RX 9060 XT | 98 | 67 | 35 |
| RTX 5060 | 88 | 60 | 22 |
| RTX 4060 Ti | 88 | 59 | 24 |
| Intel Arc B580 | 71 | 51 | 28 |
| Radeon RX 7600 XT | 73 | 50 | 26 |
| RTX 4060 | 71 | 48 | 17 |
| Radeon RX 7600 | 70 | 46 | 18 |
| RTX 5050 | 69 | 45 | 17 |
| Intel Arc B570 | 64 | 44 | 20 |
Source: Tom's Hardware GPU benchmarks hierarchy, with the test processor's effect modelled as described below. Cards with 8 GB of video memory fall behind at 4K in this data. The Radeon RX 7600 XT 1080p figure is corrected, because the published one does not fit its 1440p result. Figures updated November 11, 2026.
Which Graphics Cards Get 144 FPS at 1440p?
1440p at 144 Hz is a common target for a new gaming PC. On Ultra settings in demanding games, very few cards average 144 fps or more. Most of the rest get there with some settings lowered or upscaling switched on.
144 fps or more at 1440p
Smooth on a 144 Hz monitor
RTX 5090 (169), RTX 4090 (146)
100 to 143 fps at 1440p
Very smooth, and close to 144 Hz with a few settings lowered
RTX 5080 (131), Radeon RX 7900 XTX (121), RTX 4080 Super (119), RTX 5070 Ti (118), RTX 4080 (117), Radeon RX 9070 XT (114), Radeon RX 7900 XT (105), RTX 4070 Ti Super (103), Radeon RX 9070 (101)
60 to 99 fps at 1440p
Smooth at 60 Hz, a good base for 1440p
RTX 4070 Ti (98), RTX 5070 (97), RTX 4070 Super (91), Radeon RX 7800 XT (85), RTX 4070 (78), RTX 5060 Ti (73), Radeon RX 7700 XT (72), Radeon RX 9060 XT (67), RTX 5060 (60)
Under 60 fps at 1440p
Lower settings or play at 1080p
RTX 4060 Ti (59), Intel Arc B580 (51), Radeon RX 7600 XT (50), RTX 4060 (48), Radeon RX 7600 (46), RTX 5050 (45), Intel Arc B570 (44)
What Is a Good FPS for Gaming?
- 30 fps
- Playable. Many console games run here, but fast movement looks choppy on PC.
- 60 fps
- The standard for smooth PC gaming, and what most monitors and TVs show.
- 100 to 144 fps
- Clearly smoother on a high refresh monitor. A good target for 1440p.
- 240 fps and up
- Matters mainly in competitive shooters on a 240 Hz monitor.
Aim for your monitor's refresh rate. A 60 Hz screen shows at most 60 frames a second, so anything above that is not seen, although it can still make the game feel a little more responsive.
How This FPS Calculator Works
- 1
Graphics card speed from reviews
Frame rates for 44 graphics cards come from Tom's Hardware's GPU benchmarks hierarchy: the average of 11 demanding games at Ultra settings at 1080p, 1440p and 4K. Other cards are read off our own hardware scale and marked as estimates.
- 2
Processor speed from reviews
Processor results come from Tom's Hardware's CPU benchmarks hierarchy and are turned into the number of frames each processor can prepare in the same games. Close variants without their own review, such as the Ryzen 5 5600, are scaled from their measured sibling by boost clock.
- 3
Results for single games
For 10 popular games, Tom's Hardware also publishes each game's own average and 1% low for 14 current cards. Those cards show their measured numbers. Every other card is scaled by how the game ran compared with the 11 game average, and the processor side uses the frame rate the test processor reached in that game. Checked against the measured results, the model is typically within 2% to 7%.
- 4
Putting them together
Your frame rate sits close to the lower of the two numbers. Because the figures average many games, the calculator blends the two the way the review results do, so your result is a little under the lower number. This is the same model the bottleneck calculator uses, so the two tools always agree.
- 5
Comparing an upgrade
The upgrade comparison runs the same sum with the new part in place of the old one, then shows the gain at each resolution. If your processor stops a new card from giving most of its speed, it says so.
What it does not cover: ray tracing (apart from GTA 5 and Assassin's Creed Shadows, which are tested with it on), upscaling and frame generation, Low and Medium settings, stutter beyond the 1% low, and laptop parts. To check a game's published requirements, use the Can You Run It checker. To see which part limits your frame rate, use the bottleneck calculator.
Frequently Asked Questions About FPS
How many FPS will I get?
What is a good FPS for gaming?
Is 60 FPS good?
How accurate is this FPS calculator?
Does the processor affect FPS?
Will a new graphics card increase my FPS?
Why is my FPS lower than the calculator says?
How many FPS will I get in Fortnite?
What is a 1% low in FPS?
What is frame time?
Is the FPS calculator free?
Related PC Gaming Tools
Bottleneck Calculator
See whether your processor or graphics card limits your frame rate.
Can You Run It?
Check your PC against the specs publishers released for popular games.
GTA 5 Enhanced PC requirements
Minimum and recommended specs with a check for your PC.
View all free tools
Checkers, calculators and planners.
About the data
- Card figures
- Tom's Hardware GPU hierarchy
- Processor figures
- Tom's Hardware CPU hierarchy
- Games averaged
- 11, Ultra settings
- Games with own results
- 10
- Game results read
- November 12, 2026
- Graphics cards
- 121 (44 measured)
- Processors
- 153
- Last updated
- November 11, 2026